The Rennco Model SPS accepts both thermoformed and injection molded lids. Stacks of these lids are place into conveyor pockets, either automatically or manually. The stacks are transported to the Vertical L-Bar Sealer using a servo driven conveyor. A servo driven pusher then gently places the stack of lids into the sealer.
The SPS lid packaging system uses a completely automated integration from the trim press by means of a trim press interface unit. If you are looking for a superior lid packaging system with features that ensure product quality, the SPS is the perfect solution. If complete automation is not required, however, a simple hand load infeed conveyor system can be utilized for cost savings of the bagging operation.
Features
Easy Open Perforator
Horizontal Discharge Conveyor
Film Cart
Film Registration
1/4″ Hole Punch – Single, double or triple punc
Trimless Seal Arrangement
Powered Film Cradle
Spare Parts Kit
Spare Sealing Assembly
Static Eliminator
Transformer
DIscharge Conveyors (Multiple Sizes)
Pin Perforator Assembly
Trim Break Detection Eye
Servo Film Feed
Specifications
Electrical Requirement: 240 Volt – 1 Phase – 60 Hz Package Size: Up to approximately 100 products/package Product Size: 2-3/4″ to 7″ diameter – up to 28″ stack length Maximum Speed: 26 packages/minute
Rennco SPS Lid Packaging System
Model
SPS Lid Packaging System
Description
The Rennco Model SPS accepts both thermoformed and injection molded lids. Stacks of these lids are place into conveyor pockets, either automatically or manually. The stacks are transported to the Vertical L-Bar Sealer using a servo driven conveyor. A servo driven pusher then gently places the stack of lids into the sealer.
The SPS lid packaging system uses a completely automated integration from the trim press by means of a trim press interface unit. If you are looking for a superior lid packaging system with features that ensure product quality, the SPS is the perfect solution. If complete automation is not required, however, a simple hand load infeed conveyor system can be utilized for cost savings of the bagging operation.
Features
Specifications
Electrical Requirement: 240 Volt – 1 Phase – 60 Hz
Package Size: Up to approximately 100 products/package
Product Size: 2-3/4″ to 7″ diameter – up to 28″ stack length
Maximum Speed: 26 packages/minute