The S24B/S24BL L-Frame Sealer is a high production semi-automatic wrapping machine. Features of the machine include a 3-point sealing arm suspension with air-magnetic latching, fool-proof arm safety, a precisely controlled heat sealing cycle and a timer-controlled discharge conveyor.
Electrical relays are mounted on a U.L. listed panel located behind the easy-to-reach control panel which provides accurate heat for consistent seal. For operator convenience, the unit is equipped with telescoping legs.
Higher production speeds are achieved with the Model S24B/S24BL because it includes a power film unwind and the film inverting head normally found on fully automatic L-Sealers. The power film unwind permits a free feeding of the film, increasing operator efficiency. In addition, better seals and fewer rewraps are obtained because the film in the seal area is always loose.
Features
Automatic sealing cycle
Power film unwind
Easy loading film inverting head
Left-to-right or right-to-left product flow
Easy access electrical controls
Automatic package discharge
Brush backed pin perforator
One piece hot knife seal system
Accessories of the S-24B
Adjustable Depth Inverting Head
Adjustable Height Inverting Head
Teflon Coated Inverting Head
Special Parts for 18″ or 20″ Width Capability Available
Scrap Removal System (Vacuum or Winder)
Static Eliminator
Film Centerfolder
Casters
Specifications
‘Specifications of the S-24B and S-24BL
Sealer Size – 15″ Wide x 33″ Long (20″ Wide and 40″ Long Available)
Machine Height – Adjustable from 31″ to 43″
Floor Space – 4 1/2′ X 7′
Production Rate – 20 to 30 Packages per Minute
Power Requirements – 220V, 20 Amps, 1 Phase (U.L. Listed Control Panel)
Compressed Air Requirements – 0.5 CFM at 50 PSI
Mechanical Adjustments
Discharge Conveyor Height
Packing Table and Inverting Head Depth
Package Guide Position
Film Roll Guides
Machine Height
Electrical Controls
Seal and Open Switches
Dwell Timer
Conveyor Timer
Power Unwind Reversing Switch
Pneumatic Controls
Flow Control Valves on Sealing Arm
Air Filter
Regulator
Lubricator
Gauge
Safety Features
Automatic force sensor and switches on seal jaw provide redundant safety benefits if resistance is encountered during closing and prior to locking.
Shanklin S-24B & S-24BL
Model
S-24B, S-24BL
Description
The S24B/S24BL L-Frame Sealer is a high production semi-automatic wrapping machine. Features of the machine include a 3-point sealing arm suspension with air-magnetic latching, fool-proof arm safety, a precisely controlled heat sealing cycle and a timer-controlled discharge conveyor.
Electrical relays are mounted on a U.L. listed panel located behind the easy-to-reach control panel which provides accurate heat for consistent seal. For operator convenience, the unit is equipped with telescoping legs.
Higher production speeds are achieved with the Model S24B/S24BL because it includes a power film unwind and the film inverting head normally found on fully automatic L-Sealers. The power film unwind permits a free feeding of the film, increasing operator efficiency. In addition, better seals and fewer rewraps are obtained because the film in the seal area is always loose.
Features
Accessories of the S-24B
Specifications
‘Specifications of the S-24B and S-24BL
Discharge Conveyor Height
Seal and Open Switches
Flow Control Valves on Sealing Arm
Safety Features