The Vertrod PTV is a pneumatically operated sealer built for sealing plastic tubes of various shapes and sizes. This tube sealer is designed with an independently adjustable sealing head and tube rack support shelf to accommodate a large range of tube height requirements. The sealing jaw features a tube mask, custom matched to the size, shape, and thickness of each different tube. The tube mask provides a clean edge, maintaining tube shape around the seal, while also preventing the material from thinning and compromising seal integrity. The tube rack allows for sealing multiple tubes per cycle while maintaining a consistent product position along the sealing jaw.
Features
The Vertrod PTV tube sealer is available in seal lengths ranging from 14″ to 36″. The number of tubes that can be sealed per cycle is a factor of flattened tube width and length of seal.
The Vertrod PTV tube sealer is made in the USA and includes a 3 year limited warranty.
Seal Lengths: 14″, 20″, 24″, 30″, 36″
Seal Width: 1/4″
Single side heater bar with opposing pressure bar (rear jaw heated)
Time-based thermal impulse sealing system
Independent Seal and Cool timers from 0 to 3.75 seconds (.25 second increments)
Adjustable height sealing head
Adjustable tube rack support shelf to accommodate various product heights
One (1) Tube Rack matched to product dimensions and sealing length
One (1) Tube Mask matched to product dimensions and sealing length
Heavy-duty welded steel frame construction
Pneumatic low-pressure jaw close safety system with release if obstruction is detected
Foot pedal cycle activation
Air requirement (min): 100 psi
Electrical requirement: 115V
Specifications
Options:
Additional Tube Rack
Additional Tube Mask
Wider seal widths: 3/8″, 1/2″
Dual Seals (parallel): 2 x 1/8″, 2 x 1/4″
Bi-active jaws (top and bottom heated seal bars)
Water Cool ready heater bar
Water re-circulating package
Water Chiller and re-circulating components
Suretemp temperature controller with digital readout (up to 350F)
Vertrod PTV
Model
PTV
Description
The Vertrod PTV is a pneumatically operated sealer built for sealing plastic tubes of various shapes and sizes. This tube sealer is designed with an independently adjustable sealing head and tube rack support shelf to accommodate a large range of tube height requirements. The sealing jaw features a tube mask, custom matched to the size, shape, and thickness of each different tube. The tube mask provides a clean edge, maintaining tube shape around the seal, while also preventing the material from thinning and compromising seal integrity. The tube rack allows for sealing multiple tubes per cycle while maintaining a consistent product position along the sealing jaw.
Features
The Vertrod PTV tube sealer is available in seal lengths ranging from 14″ to 36″. The number of tubes that can be sealed per cycle is a factor of flattened tube width and length of seal.
The Vertrod PTV tube sealer is made in the USA and includes a 3 year limited warranty.
Specifications
Options: