This industrial line of pneumatically-operated thermal impulse sealer and trim sealer are designed for demanding sealing applications of thick or high temperature materials. Generally used in manually fed packaging or fabricating applications but can also be utilized in conjunction with more automated machinery. The Vertrod OB impulse bar sealer is capable of making hermetic seals with temperatures ranging from 200°F to 650°F available. Open back construction allows the user to operate the machine from the front or rear of the sealer as well as providing pass-through ability for an un-interrupted flow of film. The Vertrod OB employs PACs state of the art solid-state control circuitry along with an improved safety system.
Features
The Vertrod OB impulse bar sealer is available in four seal lengths ranging from 14″ to 30″ with a variety of options for flat seals, trim seals, or a combination of both. Contact us for more information and details on custom applications.
The Vertrod OB thermal impulse sealer is made in the USA and includes a 3 year limited warranty.
Seal Lengths: 14″, 20″, 24″, 30″
Seal Width: 1/8″
Single side heater bar with opposing pressure bar (bottom jaw heated)
Thermal impulse time control system
Independent seal and cool timers from 0 to 3.75 seconds (.25 second increments)
Open-back feed through style with 3″ jaw opening
Heavy-duty floor standing cabinet with leveling feet
Stainless steel table top surface
Pneumatic low-pressure jaw close safety system with release if obstruction is detected
Foot pedal cycle activation
Air requirement (min): 100 psi
Electrical requirement: 115V
Specifications
‘Options:
Wider seal widths: 1/4″, 3/8″, 1/2″
Dual Seals (parallel): 2 x 1/8″, 2 x 3/8″
Bi-active jaws (top and bottom heated seal bars)
Hot Wire Trim Seal (Beaded trim seal)
Cold Cut Wire Trim
Water Cool ready heater bar
Stainless Steel Adjustable work shelf
Pneumatic Flying Knife cut off
Stainless Steel Frame and Cabinet
Suretemp temperature controller with digital readout (up to 350F)
Vertrod OB
Description
This industrial line of pneumatically-operated thermal impulse sealer and trim sealer are designed for demanding sealing applications of thick or high temperature materials. Generally used in manually fed packaging or fabricating applications but can also be utilized in conjunction with more automated machinery. The Vertrod OB impulse bar sealer is capable of making hermetic seals with temperatures ranging from 200°F to 650°F available. Open back construction allows the user to operate the machine from the front or rear of the sealer as well as providing pass-through ability for an un-interrupted flow of film. The Vertrod OB employs PACs state of the art solid-state control circuitry along with an improved safety system.
Features
The Vertrod OB impulse bar sealer is available in four seal lengths ranging from 14″ to 30″ with a variety of options for flat seals, trim seals, or a combination of both. Contact us for more information and details on custom applications.
The Vertrod OB thermal impulse sealer is made in the USA and includes a 3 year limited warranty.
Specifications
‘Options: