The Vertrod PS Med impulse sealer is designed for medical applications requiring heavy-duty sealing of wide materials that require validation. These sealers are generally used in manual packaging or fabricating applications but can also be utilized in conjunction with more automated machinery.
Features
Seal Lengths: 36″, 48″, 60″, 72″, 84″, 96″, 108″, 120″
Seal Width: 5/16″
Single heater jaw with opposing pressure jaw (top jaw heated)
Incrementally adjustable top jaw for precise pressure alignment along sealing length
High flow water cool ready heater bar
PAC medical control system for applications requiring seal validation
Seal parameter monitoring with alarm lockout function
Calibratable controllers with external verification ports
Suretemp temperature controller with digital readout to 350F
Independent seal and cool timers (.1 sec. increments to 9.9 sec.)
Open-back feed-through style with 3″ jaw opening
Welded structural steel frame construction with leveling pads that allow for anchoring machine
FDA compliant white powder coat finish
Ported exhaust
Pneumatic low-pressure jaw close safety system with release if obstruction is detected
Foot pedal cycle activation
Air requirement (min): 100 psi
Electrical requirement: 115V/230V (dependent on model and options)
The PS Med pouch sealer is capable of making hermetic seals with temperatures ranging from 200F to 650F. The welded structural steel tubular frame provides the stability necessary to make seals up to 120″ long and seal widths up to ” wide. Open-back construction allows the user to operate the machine from the front or rear of the sealer ,as well as providing pass-through ability for an un-interrupted flow of film. This machine is equipped with the PACs medical control system. It is a precise temperature-based system with real-time monitoring of all sealing parameters for applications requiring seal validation. Built-in alarm functions prevent operation when outside of validated settings. External verification ports provide for calibration of controllers.
The Vertrod PS Med is available in seal lengths ranging from 36″ to 120″ with a variety of options for flat seals, trim seals, or a combination of both. Contact us for more information and details on custom applications.
The Vertrod PS Med validatable impulse sealer is made in the USA and includes a 3 year limited warranty.
Vertrod PS Med Impulse Sealer
Model
PS
Description
The Vertrod PS Med impulse sealer is designed for medical applications requiring heavy-duty sealing of wide materials that require validation. These sealers are generally used in manual packaging or fabricating applications but can also be utilized in conjunction with more automated machinery.
Features
The PS Med pouch sealer is capable of making hermetic seals with temperatures ranging from 200F to 650F. The welded structural steel tubular frame provides the stability necessary to make seals up to 120″ long and seal widths up to ” wide. Open-back construction allows the user to operate the machine from the front or rear of the sealer ,as well as providing pass-through ability for an un-interrupted flow of film. This machine is equipped with the PACs medical control system. It is a precise temperature-based system with real-time monitoring of all sealing parameters for applications requiring seal validation. Built-in alarm functions prevent operation when outside of validated settings. External verification ports provide for calibration of controllers.
The Vertrod PS Med is available in seal lengths ranging from 36″ to 120″ with a variety of options for flat seals, trim seals, or a combination of both. Contact us for more information and details on custom applications.
The Vertrod PS Med validatable impulse sealer is made in the USA and includes a 3 year limited warranty.
Specifications
Options: