The Vertrod Medical Open Back sealer is a fully validatable medical pouch sealer designed to comply with the stringent guidelines of ISO 11607 terminally sterile packaging requirements. This pneumatically powered impulse heat sealer is intended for medical and other industrial applications where control of process parameters is critical and seal validation is required.
Features
Sealing Features:
Seal Lengths: 14″, 20″, 24″, 30″
Seal Width: 5/16″
Single heater jaw with opposing pressure jaw (top bar heated)
High flow water cool ready heater bar for faster sealing cycles and more consistent cooling temperatures when utilizing water cooling
Independent digital seal and cool timers (1.0 to 9.9 seconds)
High Pressure sealing capabilities with increased jaw force
Incrementally adjustable pressure bar for precise sealing jaw alignment
Digital sealing pressure switch with adjustable band to set high and low alarm tolerances
Temperature Control Features:
Temperature controller with digital readout to 350 F (Up to 650 F optionally)
Adjustable temperature band for high and low alarm tolerances
Seal time begins when set temperature is achieved to prevent inconsistencies with heat build up in sealing jaws
MedPAC Medical Control Features:
ISO 11607 Compliant
Fully calibratable pressure switch and temperature controllers
Verification ports for easy verification and calibration of internal controllers
Real time seal process parameter monitoring (Temperature, Pressure, Time)
Alarm function prevents operation when there is a deviation from validated settings
Safety Features:
Pneumatic low-pressure jaw close with release if obstruction is detected
Jaw close time out with release when delay is detected
Locking control panel cover to prevent unintentional changes in sealing parameters
Emergency stop switch accessible through locking control box cover
Versatility:
Ported exhaust to pipe outside of clean room and prevent contamination
Unobstructed sealing jaws with pass through ability (3″ jaw opening)
Machine operation from the front or rear with the ability to rotate the control panel accordingly
Stainless Steel tabletop work surface
Vertrod validatable medical pouch sealers are capable of producing quality hermetic seals in almost any materials ranging from seal temperatures of 200F to 650F. The Vertrod Med OB sealer is equipped with PACs medical control system. It is a precise temperature-based system with real time monitoring of all sealing parameters for applications requiring seal validation. Built in alarm functions prevent operation when outside of validated settings. External verification ports in the control cabinet allow for verification and calibration of controllers, a requirement for IQ/OQ processes.
The Vertrod Med-OB validatable medical pouch sealer is available in four seal lengths ranging from 14″ to 30″ with a variety of options for flat seals, trim seals, or a combination of both. Standard model features are listed below with a selection of available options. Contact us for more information and details or to discuss custom applications.
Vertrod invented the thermal impulse heat-sealing process over half a century ago, and our validatable medical pouch sealers are known for their rugged construction and ability to produce uniform, consistent, airtight seals in a wide variety of materials. Today, all Vertrod sealers are built to the same high standards that earned our reputation for quality nearly 50 years ago. Its no surprise that many Vertrod thermal impulse heat sealers remain in service after decades of use. The Vertrod name is synonymous with unparalleled durability, service and reliability.
The Vertrod Medical Open Back sealer is made in the USA and includes a 3 year limited warranty.
Specifications
‘
Air Requirement (min): 100 psi
Electrical Requirement: 115v standard (230v optional)
Vertrod OB Med Validatable Medical Pouch Sealer
Model
OB
Description
The Vertrod Medical Open Back sealer is a fully validatable medical pouch sealer designed to comply with the stringent guidelines of ISO 11607 terminally sterile packaging requirements. This pneumatically powered impulse heat sealer is intended for medical and other industrial applications where control of process parameters is critical and seal validation is required.
Features
Sealing Features:
Temperature Control Features:
MedPAC Medical Control Features:
Safety Features:
Versatility:
Vertrod validatable medical pouch sealers are capable of producing quality hermetic seals in almost any materials ranging from seal temperatures of 200F to 650F. The Vertrod Med OB sealer is equipped with PACs medical control system. It is a precise temperature-based system with real time monitoring of all sealing parameters for applications requiring seal validation. Built in alarm functions prevent operation when outside of validated settings. External verification ports in the control cabinet allow for verification and calibration of controllers, a requirement for IQ/OQ processes.
The Vertrod Med-OB validatable medical pouch sealer is available in four seal lengths ranging from 14″ to 30″ with a variety of options for flat seals, trim seals, or a combination of both. Standard model features are listed below with a selection of available options. Contact us for more information and details or to discuss custom applications.
Vertrod invented the thermal impulse heat-sealing process over half a century ago, and our validatable medical pouch sealers are known for their rugged construction and ability to produce uniform, consistent, airtight seals in a wide variety of materials. Today, all Vertrod sealers are built to the same high standards that earned our reputation for quality nearly 50 years ago. Its no surprise that many Vertrod thermal impulse heat sealers remain in service after decades of use. The Vertrod name is synonymous with unparalleled durability, service and reliability.
The Vertrod Medical Open Back sealer is made in the USA and includes a 3 year limited warranty.
Specifications
‘
Options: