The Vertrod PS Direct Drive impulse bar sealer is designed for heavy duty sealing applications of thick or high temperature materials requiring long seal lengths and higher pressure than the standard PS. The PS Direct Drive is generally used in manually fed packaging or fabricating applications but can also be utilized in conjunction with more automated machinery. This sealer is capable of making hermetic seals with temperatures ranging from 200°F to 650°F. The welded structural steel tubular frame provides the stability necessary to make seals up to 120³ long and seal widths up to 1³ wide. Open back construction allows the user to operate the machine from the front or rear of the sealer as well as providing pass-through ability for an uninterrupted flow of film. The PS Direct Drive employs PACs state of the art solid-state control circuitry along with an improved safety system.
Features
The Vertrod PS Direct Drive impulse sealer is available in seal lengths ranging from 36″ to 120″ and seal widths up to 1″. The PS Direct Drive comes with a variety of standard features and options, contact us for more information and details on custom applications.
The Vertrod PS Direct Drive impulse bar sealer is made in the USA and includes a 3 year limited warranty.
Seal lengths: 60″, 72″, 84″, 96″, 108″, 120″
Seal Width: 1/4″
Single side heater bar with opposing pressure bar (bottom jaw heated)
Direct drive vertical jaw motion for increased sealing pressure capability
Time-based thermal impulse sealing system
Independent Seal and Cool timers from 0 to 3.75 seconds (.25 second increments)
Open-back feed through style with 3″ jaw opening
Incrementally adjustable top jaw for precise alignment along sealing length
Welded structural steel frame construction with leveling pads that allow for anchoring machine
Pneumatic low-pressure jaw close safety system with release if obstruction is detected
Safety switch indication lights for precise, easy positioning of heat/high pressure engagement
Foot pedal cycle activation
Air requirement (min): 100 psi
Electrical requirement: 230V, single-phase
Specifications
Wider seal widths: up to 1″
Dual Seals (parallel)
Dual Sealing Jaws (parallel)
Bi-active jaws (top and bottom heated seal bars)
Jaw Selector Switch (Bi-Active or Top Heat)
Heater Bar on top, lower pressure bar
Hot Wire Trim Seal (Beaded trim seal)
Cold Cut Wire Trim
Water Cool ready heater bar
Stainless steel adjustable work shelf
Suretemp temperature controller with digital readout (up to 350F)
Vertrod PS Direct Drive
Description
The Vertrod PS Direct Drive impulse bar sealer is designed for heavy duty sealing applications of thick or high temperature materials requiring long seal lengths and higher pressure than the standard PS. The PS Direct Drive is generally used in manually fed packaging or fabricating applications but can also be utilized in conjunction with more automated machinery. This sealer is capable of making hermetic seals with temperatures ranging from 200°F to 650°F. The welded structural steel tubular frame provides the stability necessary to make seals up to 120³ long and seal widths up to 1³ wide. Open back construction allows the user to operate the machine from the front or rear of the sealer as well as providing pass-through ability for an uninterrupted flow of film. The PS Direct Drive employs PACs state of the art solid-state control circuitry along with an improved safety system.
Features
The Vertrod PS Direct Drive impulse sealer is available in seal lengths ranging from 36″ to 120″ and seal widths up to 1″. The PS Direct Drive comes with a variety of standard features and options, contact us for more information and details on custom applications.
The Vertrod PS Direct Drive impulse bar sealer is made in the USA and includes a 3 year limited warranty.
Specifications