The E-250 Automatic L-Bar Sealer is engineered for efficiency with logic and precision. As product is fed onto the conveyor, electric eyes measure and advance it to the centerfolded film and sealing area. To prevent the next package from entering during the sealing cycle, the belt advance is temporarily deactivated. When the sealing jaw opens, the advance is reactivated and the wrapped product is discharged into the shrink tunnel. It’s logical. It’s precise. It’s efficient.
Features
Standard Features
Hot tooled steel knife sealing system eliminates wire replacement
Lower heated seal pads for fast, reliable seals
Fully automatic package length adjustments via horizontal or vertical electric eyes
Film salvage winder
Adjustable height legs and casters
Film cradle with power unwind
Hand wheel for product height adjust
Perforator wheels for air evacuation
Film miser/Film support bar
Versatility
Product is transferred by conveyor belt – no pusher
Top mounted control panel for easy access
Seals most films – polyolefin, PVC and polyethylene
Smooth product transfer allows wrapping of non-rigid product
Fully automatic operation requires little or no operator assistance
Options
Pneumatic hole punch
Conveyor soft start
Product staging
Wide band seal system for polyethylene film
Product stop separator
Print registration
Anti-stat system
Film center-folder
Factory Installed Options Only
Variable speed w/soft start
Multi-pack pusher/accumulator
High speed kit
Custom infeeds
Closing conveyor for small products
Specifications
Max Pkg Dimensions*: 15.5″ W x 21-1/2″ L Machine Dimension: 65″ L x 33″ W x 60″ H Net. Weight: 640 lbs. Max. Pkg. Ht: 5″ Max Film Width: 20″ Electrical: 220V, 12A, 1ph Caster Ht: 33-5/8″ Air Requirements (min.): 1 CFM @ 80 PSI*Package height, width, and length are interdependent of each other.
Conflex E-250
Model
E-250
Description
The E-250 Automatic L-Bar Sealer is engineered for efficiency with logic and precision. As product is fed onto the conveyor, electric eyes measure and advance it to the centerfolded film and sealing area. To prevent the next package from entering during the sealing cycle, the belt advance is temporarily deactivated. When the sealing jaw opens, the advance is reactivated and the wrapped product is discharged into the shrink tunnel. It’s logical. It’s precise. It’s efficient.
Features
Standard Features
Versatility
Options
Factory Installed Options Only
Specifications
Max Pkg Dimensions*: 15.5″ W x 21-1/2″ L
Machine Dimension: 65″ L x 33″ W x 60″ H
Net. Weight: 640 lbs.
Max. Pkg. Ht: 5″
Max Film Width: 20″
Electrical: 220V, 12A, 1ph
Caster Ht: 33-5/8″
Air Requirements (min.): 1 CFM @ 80 PSI*Package height, width, and length are interdependent of each other.